Goto SE11 transaction code , in that select table provide table name and click on create to create table

We can create table in two ways...1 predefined method2 data type method

3 and 6 are the cities divisible by 3

Assuming that you can't visit any city more than once and that I haven't missed any journeys the answer is 64961.This consists of the journeys listed below. Only pathways where successive citi...

he had a chance to eat 76 bananas in first day coz he ate 100 bananas in 5 days n each day he increased his stuff by eating extra 6 day by day

8 bananas on the first day..

Function module  stores in general repositary. That can be executed and tested seperately. We can raise expection in Function module.

In subroutine can not be executed and tested seperately. We can't rasie exception.

For tab control we have to use concodinate options in your coding.

i got 10:51:52am 4th day at 5am actual time while the clock time is 4:12 am 10am - 4:12 = 5hours and 48 mins difference so 5 + 5:48 = 10:48:00 actual time every 1.5 hours of difference the clock wil...

10:51:20 am

1416

9-6=3and every change in 9 with 3 will get a diffenrence of 3=>   there will be 10 no's with 3 in units place whose place value is 1         =>     th...

On the inclusion of the new member in the committee, there is no change in the average age of the committee members as it was 4 years back implying:The newly substitute in the committee is a younger c...

Four years back, Let the sum of the Ages of the 9 members of the committee( Who still continues )  be M. Let the age of the 10th memeber at that time be R.  Hence the average age of the 10 m...

Once I am not able to complete my task with in the time period because of lack of information from client side. It was very big issue on that time. But only thing I did was, the mail communication wit...

High achievers tend to perform well in high pressure situations. I have enjoyed Working under pressure, its like a challenge. Creating a good environment and planning will lead to success that's what I believe the most

Yes, I can work. But only thing is you must analyse all problems and its importants. Based the you must give priority to those problems. If you follow this any one can work under deadlines and pressures

My greatest weakness is i trust some one very quickly & I can make friendship with some one very easily .

My greatest weakness is tention.

My greatest strength is i am very cooperative & flexible.I can adjust myself to any situation. I am also very hard working

My greates strength is Hard work, Flexibility and co-ordination with my team members.

If you take any field, that is depends on its own business or other business. You can't imagine the world with out business.

x+x+6+x+12+x+18+x+24=100

at first day he eats 8 bananas, then 14,20,26,32

In my opinion the job of the manager is to do right things right. Both the capability right things and things right lead to the success of the project and the maturity of the PM

Manager should do: Right Things
Leader should do : Things right

If the car number is of size 5, then here we have two cases one is the car no starting with digit and other is no starting with character Case 1: first place can be occupied in 9 places and remaini...

First letter can be selected in 26 ways. Second can be in 25 ways (Two letters must be distinct). Then first digit in 9 ways then second and third in 10 ways. Total number of ways is 585000.

1. Create recording
2. Transfer the data from legacy system to internal term
3. From internal table transfer the data to BDC structure
4. Create session or use call transaction method to update data to database table.

Heres the approach.. 1. Analysis the Data.       2. Generate SAP structure.       3. Develop transfer program  4. Create sequential fi...

Many things are there. For example you may trnasport table with out transporting Data element or domain used in that table.

Change the symbol
96+96(10)+96(100)+96(1000)

1,5,2,8

4*(4!)=4*(1*2*3*4)

=96


therefore 1000*96 + 100*96 + 10*96 +96 = 106656

at 0th minute, send 3,7.
at 3rd minute, send 17.
at 7th minute, send 13.

at 20th minute, all sent!

At first persons with 17m and 13m start. When 13m finish, 7m starts. There are remaining 4 minutes when 17m and 7m are walking together. After 4 minutes 17m finish and 7m is still walking for 3min. Bu...

While we printing, offsetting will determine where to start. For Example
Write : 25 'Offsetting Example'.
This is case Offsetting Example will be printing from 25 th coloum of that line.

SE38: ABAP Editor where we can develop our programs

SE80: Object Navigator where we develop other things like

Screen Painter
Menu Painter
Function Builder
Class Builder
ABAP Editor
ABAP Dictionary

Hi,SE-38 is an abap editor,here we can develope new program.SE-80 is an object navigator,Here lot of future's avilable      1) direcly modiy the program   &...

Many things are there. That is depends upon the client requirement. Here I will give few example which will run in background.

Dear Mr.Prabudas,

 ALV - is ABAP (SAP) List Viewer. It is not line viewer.

Classical Report : It is nothing but getting data from one or more tables and displays it on LPS formated or unformated. It is having only one screens for the output. It has not any sub list.Events l...

ans 1)150+55+125=230
       2)85+70=155

165 students can speak atleast one language
50 students speak only one language

First question D
Second question is A

for the second answer was given in the first itself. please refer the above

If the name of box is MATERIAL, then in PBO LOOP AT SCREEN. IF SCREEN-NAME = 'MATERIAL'. SCREEN-INPUT = 0.        [i][code] ( 1 - for enabling and 0 - for disabling ) MODIFY SCREEN. ENDIF. ENDLOOP.

In module pool screen select the input box and go to characterstics. Then select output only. Then it will become disable mode.

BALA:x km/hr=10/t
=>xt =10..............(1)

Abhay:(x+1.5)km/hr=10/(t-1.5)
=>t-x=1.5..............(2)
on solving we get x=4 and 5.5

speed of Bala is 2.5 km/hr and Abhay is 4 km/hr

If writen coding in smartforms, we can set break point there itself or use Tcode trace_smartforms

Break point is mainly used for to debug the object. If you want debug smartforms you can use the standard tcode smartform_trace it wil automatically go the debuggin mode or else if you want setbr...

Compound ration formula is a:b :: c:d :: e:f = a*c*e : b*d*f

Ans is 7:10

Hi,
In session method the system automatically handled the error.
goto sm35
select the session name ,then select the analysis tab button in the top after that
select the Log created,Here we can see the error record.


Thanks
Sankaran R

You can use the function module to upload data from Excel file. If it is difficult we can save excel file as text file then use GUIUPLOAD

SKIP: It is for leave the blank line between two lines. We may use this statement while preparing the selection screen.

Reserve is used to prevent page break between the the set of lines.

SKIP: it is used for leave the blank lines between two lines.
REVERSE: It is for reverse the string.

SKIP command used to leave one blank line.
Reserve is used to protect the bage break between the set of lines. For example if there is no sufficient space in the current page for set of say n lines. Then the entire set of lines will be printed in the next page.

Skip provides a space between lines, while reserve executes  a page break on the current page if less than lines are free between current line and the page footer.

Get stronger and become more visible in the future
Becoming more and more recognized as a legitimate set of skills to be successful in business.

PMP is a highly professional certificate. It requires 40 hours of mandatory PM training which exposes you to the PMBOK guide. The PMBOK guide is a reference book built on the collective intelligence o...

Define business goals
Reduce the amount of paperwork to what is absolutely necessary
Reduce organizational barriers Improve communications
Question if a step in the process is really needed, or if it can be eliminated to make delivery as fast as is practical.
Use efficient decision making

Quality controll is ensuring that every thing is done as per plan and specification. Firstly we need to study the parameters which comes to play an important role in the quality controll phase. Docume...

Risk management
Lifecycle costing
Real options
Organizational process assets
Non-technical project terminations 
Requirements formulation analysis

Choose an optimal solution for the following tasks assigned to you:1) Customer is expecting a lot from this project and have already communicated to you while awarding this project.2) Your employ...

Building confidence within the whole project team
Managing change
Planning
Communication
Risk analysis
Problem solving
Quality control

Main Attributes are:

@ Keen to gather information and assemble them to trace out the current scenario
@ Should not be suffer from planning myopia
@ Should accept the fact that contigencies may arise so if possible complete as much as possbile during the favorable situation.
@ Should have paticence

A warehouse management system, or WMS, is a key part of the supply chain and primarily aims to control the movement and storage of materials

Using sy-lsind it is possible, but only backward jump. Forward jump is not possible

Using transaction code : Sy-lysnd

In SAP ABAP tables which created by user which  starts with either 'Y' or 'Z'. These are either  client dependent or client independent tables. That deponds on mandt field which is included in the table.

In SAP ABAP, tables which created by user means table name whcih starts with 'Z'. These are all client dependent tables.

work area: work area it hold the single data during the execution of the program.

Headerline: Using header line we can pass the value into the internal table.


Regards,
sankaran Ramaiah

Work area is like structure. Header is also like structure but it is attached with internal table.

First up all you should know the enahancement name then go to smod give the enhancement name the deactivate it.

Regards,
Sankaran Ramaiah

Go to CMOD. Give is project name. In tool bar there is one icon for deactivate. Click that. Then you can delete this project.

1. 'At New' will work in loop at statement. 'On change' will work in any loop.
2. 'At new' will check the field and proceeding fields, 'On change' will check only the particular field.

Q1- only apple 4 %
Q2 - Only grapes 26%
Q3 - None 36 %

Draw the three circle name as apple grapes orangethey have to be intersect each other only apple given =20%only oranges given=30% ,only grapes given=40%all three=10%,apple & orange=12%ap...

First complete MCA with good percentage. Try to attend campus interview if it is there. Try do software course which is latest reqirement in the market.

Hi Vaudevan,
  I think yours is correct

fold it in such a way that it is folded 6 times and all those are of equal length and cut it along the joints and get 7 equal parts

There n urns and m  balls.

3n + 3 = m
4n + 1 = m

Sove this we will get n = 2 and m = 9

what to do with 2 answers?
both 2&9 and 7&24 are practically right.

No. of black ball is 12.

there r a total of 12 black balls,6 white balls the ratio of white balls to black balls is 1:2given gray 9 ballsthen ratio becomes 2:4:3in 2:4:3 3 indicates 1/3rd of actual.as black's share is 4 it should be 4*3=12.and whites r 2*3=6.

Loss - 10 %

Loss of 50 paise

In two day they can complete 3/20 of work. In 6 days they can complete 18/20 of work. 7 th day A complete the remaining work.
Total - 7days.

ans34

in 32 min

32 min

15 hits and 25 miss

50*X-10(40-X)=500 as he lost 10p for a miss we have to substract and no. of hits we get is 15.

Ans is 3.14 * d

answer is

l=2(22/7)*r

l=d(22/7)

l=3.14*d

min weight is 51

min weight is 51

First ball can be choosed in 33 ways. 2nd ball in two ways and third in one way. Total number of chance is 66

11C3 / 33C3

Assume A's salary is 15 and B's salary is 10. Total money is 150. So if both paid the money will be lost in 6 days.

the money will last for 6 days only.

  345+344+343+342+349
=342(3+2+1+0+7)
=342*13

So the number is divisble by 13
so answer is c)13.

sum is 1723. It is not divisible by above numbers

Give proper inputs to solve.

the eq is like this: let u km/hr : speed of water, v km/hr : speed of boat in still water 1/u=1/4+1/(v+u)+(v-u)/4(v+u) 15 mins=1/4 hr solving, u=2km/hr & v can have any value.

He does not get gain or loose.
It is equal

Loss is 50p

Your question is not clear. As per my understanding, any type of records can be transferred to SAP R/3

By using SE38, we can run the program in back ground. it wil generate a spool number.

Using program RSBDCSUB to excute a program in background.

Each car moves a 100 cm forward and 50 cms backwardsthe total forward and a backward moment is defined as a cycle.each cycle takes 4 seconds as 2 seconds 100 cms forward at 50 cm/s and backwards at 25...

Mini value is 22

Answer: Time Distance of A Distance of B 11-12 4 0 12-1 8 0 1-2 12 1 2-3 16 3 3-4 20 6 4-5 24 10 5-6 28 15 6-7 32 21 7-8 36 28 8-9 40 36 Now at 9 am, A is trav...

After 8 hours 48min from B starts. That is 9.48 pm.
[in 8 hours B travels 36 km. A starts 2 hrs early. He would have been completed 40 km. Next 48 min A would be completed  3.6 km that is 43.6km. B can completed 7.6 km in next 48 min. He also reach 43.6km.

Dear Pradyumna Ku Mohanty,

  If you don't know the answer exactly.... please do not post any wrong answers by your assemption.

Vlaue table : it will be assigned to a field in domain level. It is used to get possible input entries. But it will not check the value.

Check table : It is the table difined in foreign key table to make a check against the entry in foregin key table.

Ans:17

Total=d+t+h-dt-th-hd+dth
76=39+46+53-23-22-ht+15
76=108-ht
ht=108-76
ht=32

We want only times and hindu,so we subtract the value of all papers read is 15 from ht.

so the ans is 32-15=17.

using union law (aubuc)=a+b+c-(anb)-(anc)-(bnc)+(anbnc)

The ans is 25:21:36

its ratio ll be 25:21:36

If operator precedence is taken in C language then

2*3/5%7=1
from L to R PRECEDENCE
2*3=6
6/5=1 it give question in return
1%7=1 it gives remainder in return

21/250

let business as : x           own       :2/3 x           sells&nb...

3/4 of his share  = 75000
so his share  = 100000.
2/3 of business value  = 100000
so total value  = 150000

Speed in still water = 10 kmphstream speed         =  x kmphdown stream speed = 10 + xupstream speed       = 10 - x  24 ...

the time taken by the boat in donw stream= the time taken by the boat in up stream i.e., (24/(10+x))=(16/(10-x)) where x in the speed of the water=2kmph.

4/(1/10+1/20+1/30+1/40) = 20 km/hr.

20 kmph

In performance tuning the following steps are involved.1. Avoid inner loops.2. Avoid Select statement inside the loop.3. Use maximum where conditions to fetch the exact records.4. Use index to reduce ...

List of user exits related to sales are available in "MV45AFZZ".

binary search is used to get the more data from internal table instead of linear search ,and binary search is the faster and efficient .

It is one of the search methods which is much faster that leaner search. Binary search keep on dividing the entire set records into two and search still it will reach the record.

Modiy is used to edit and change the existing record. In case of database table, if the record exist then it will try to modiy otherwise it will inser new record.

Insert is used to insert a record in the tabel in a speicified place.

Update is used to change the existing record.

This is one of modularization technique. While writing program, some functionality (coding) may get repeated. Instead of repeating the code, we can create a function module and we can call this where it is required.

Sorry your question is not clear

Lock object prevents the access of a record to more than one user at a time.

All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within...

Tcode for recording is SHDB

SHDB

Set screen is used to set the next screen attribute during runtime. Call screen is used to call next screen sequence.

in the case of setscreen the entire processing of the current screen takes place and then the system branches out to next screen.if u want to branch out to the next screen without processing the curre...

You can call form not report.

In editor

Perform

    yes we can

There are only three types. Standarded , Table Sorted Table and Hashed Table

1) Transparent Table 2)Index table 3)Hashed table 4)Sorted table

SHDB is tranasction code for recording. There is no sepearte transaction code for BDC. We can write coding for BDC in report, that is SE38.

  Transaction code for bdc :SHDB

What is usage of Datasets.

Where we can use mostly.

Using function modules gui_download and gui_upload.

While you selecting records from data base table, we have to use maximum fields in where conditions so that unwanted records can be eliminated.

Create Internal table without Header.Do all the internal table operations by Creating Workarea. 
This would be the effecient way of coding. 
Don't forget to CLEAR Workarea whenever it is required.

Size of internal table is depend on the following points.
1. occurs clause / Initial size
2. No. of records in that internal table.

Internal tables are runtime objects so they dont take any memory

HI,

Internal table: Internal table is nothing but an temporary table Its working only during the execution of the program.

Database table: Data base table is a storage place.Using database table we can store the business datas.



Regards,
Sankaran Ramaiah

Internal table is used to store the records during run time only, but database table is used to store the records permenanetly.

This question is not clear.

I created user exit for spliting invoice.

there are four types 
1.function exit 
2.menu ixit 
3.screen exit. 
4.field exit. 
these are the user exits 

1. Avoid nested select statements
2. Do not use select statements inside loop.
3. Use all key fields in where conditions
4. select only nececessary fields.

In Performance Tuning. Suppose if you got that problem is in Loop. How to find which specific loop is giving problem? What is the method to find out OR Is there any tool to find out?

Client dependent tables have MANDT as its first field and the data type of MANDT is CLNT..In Order to create a client independent table, do not mention the MANDT in the first field of the table.

D0 not mention MANDT field to the table to make it client independent .

Actually Z tables are client dependent tables. And MANDT is not mandatory. if you're using this field others can identify this is client dependent table or not.

A Client Dependent Table is viewable only by the credentials proposed. Only those people of same client login can see those contents of that table. But a few tables, which need to show the same info...

There are two approached. One top-down and another one bottom up. In any way we can create the database table.

YES , IF WE HAVE CUSTOMISED DATA TO STORE IN TABLE , WE CREATE A TABLE.