• #### Test Cases for Finding Square Root of a Number

Write test cases for a programme which finds square root of a number

• Jan 24th, 2010

1 ) Chk by giving a input as a empty string2 ) Chk by giving a input as alphabets3 ) Chk by giving a input as special char4 ) Chk by giving a input as whole number 1,2,3,4, etc5 ) Chk by giving input ...

#### saravanan123

• Jul 10th, 2009

Test Cases for Finding Square Root of a Number
1. Check whether the square root cannot be zero
2. Check whether any 2 same number is multiplied it gives the square root of the number
3. Check whether it displays as result only one number of the square root of the number

• #### How to Test a White Paper?

• Jan 24th, 2010

1 ) Check the size of the paper whether it is according to the requirements. eg: A4 , full scape.2 ) Check the quality of the paper3 ) Check whether we can write with ink pen, ball pen, pencil, etc4 )...

#### kurtz182

• Dec 20th, 2009

STEPS TO TEST A WHITE PAPER1) Study the requirements for the product and determine what it is to be used for2) Author test cases that will allow you to fully test each and every requirement3) Map test cases to requirements4) Prioritize the test cases5) Execute the test cases

• #### What are the most important test case for the circle?

kurtz182

• Member Since Nov-2009 | Dec 23rd, 2009

TESTING A CIRCLE

Using simple words that do not imply knowledge of mathematical jargon, I would write these three test cases:

Precondition:
There is a figure drawn on a piece of paper.

TC1) It is a closed figure.
TC2) It has a center point.
TC3) The distance from center point to closest point on figure is equal in all directions.

#### sujata_Vxt

• Jun 20th, 2011

1. It should pass through 3 distinct points lying in the same plane.2. All lines joining 2 opposite points on this object should pass through a single point and have same dimension(length).

• Jan 24th, 2010

1 ) Check whether you have a compass or not. 2 ) Check whether the compass is tight or not.3 ) Check whether you have inserted a pencil to it. 4 ) Check whether the inserted pencil...

• #### How to write integration test cases for a Web based application ?

• Jan 24th, 2010

1 ) Chk whether the bigger module is spilit into smaller modules. 2 ) Chk whether the smaller module is bug free & tested to the expectation.3 ) Chk whether the smaller module is added to the bigger modulue to acheive the intergrated modulue.

#### saravanan123

• Aug 29th, 2009

Test cases for web application It is very easy only and there is not a difference it is as same as writing test cases for window based application only. As a tester we have not to bother for integ...

• #### Write a unit test to test reverse String. [TestFixture] class UnitTests { [Test] public void TestReverseString() { // write code here... } }

• Jan 24th, 2010

1 ) Chk whether the code compiles & runs properly. 2 ) Chk whether the code accepts the string at the run time3 ) Chk whether the String accepted gives the desired output.   eg...

#### saravanan123

• Aug 29th, 2009

Reverse string is nothing but if we give any input the output will be shown directly reverse to it This is for sentence format say for example if we "saravanan is lazy" as input but o...

• #### Define equivalent partitions for a text field which accepts maximum 20 alphabetical chars and hyphens "-".

• Jan 24th, 2010

1 ) Chk by enterning empty string in the text field2 ) Chk by enterning special char other than hyphen3 ) Chk by enterning a alphabetical chars  with a max of 20 4 ) Chk by enterning a hyphe...

#### kurtz182

• Dec 26th, 2009

Enter the following:- no alpha chars or hyphens- 1 alpha char- 1 hyphen- 1 alpha char and 1 hyphen- combination of (max - 1) alpha chars and hyphens- combination of max alpha chars and hyphens- c...

• #### Write test cases for 10 values to arrange in ascending order?

• Jan 24th, 2010

1 ) Chk whether the given series contain 10 numbers. 2 ) Chk that we are able to arrange the given series from Small to Big.3 ) Chk whether the numbers are seperated by commas to avoid confusion.

#### saravanan123

• Aug 29th, 2009

Test cases for 10 values to arrange in ascending order:1. Check whether it can be only numbers2. Check whether it displays the answers in the format of small to big3. Check whether it displays all the inputs to the output4. Check whether it displays all the output correctly from smaller to bigger

• #### Write test cases for copy & paste in MS Word

saravanan123

• Member Since Jul-2009 | Aug 29th, 2009

Testcase for Cut / Paste in Word Format
1.Check whether we are typed something in many fields
2.Check whether we can select  by clicking and dragging
3.Check whether we are dragging it displays to be covered with some highlighted colors
4.Check whether we can copy the highlighted field by pressing Ctrl+x
5.Check whether we cut the field it cannot  shows the cutted one
6.Check whether we can paste the cut by selecting Ctrl+v
7.Check whether the field we cut and pasted is correct

Testcase for Copy / Paste in Word Format
1.Check whether we are typed something in many fields
2.Check whether we can select  by clicking and dragging
3.Check whether we are dragging it displays to be covered with some highlighted colors
4.Check whether we can copy the highlighted field by pressing Ctrl+x
5.Check whether we copied field it cannot  shows the selected one
6.Check whether we can paste the cut by selecting Ctrl+v
7.Check whether the field we cut and pasted is correct

#### ROOPA

• Aug 24th, 2011

* verify the some text is present in ms word *verify that text is selected by mouse/Ctrl +a *verify the selected right click on text and then select copy or Ctrl +c *verify the selected text is activ...

#### keshav

• Aug 16th, 2011

1 open new ms word doc 2 default ms word file should be blank 3 check the new option in word doc 4 check the save option 5 check save as 6 check close 7 check the edit file and write some thi...

• #### write test cases on switch board

• Feb 15th, 2010

1) check whether all the switches in the board are  in proper condition  or not.2) check whether all the switches have proper wire connection. 3) If there is a two way switch check whet...

#### mathan_vel

• Aug 19th, 2009

1. Ensure that all the exact wires (+ve, -ve, earthen) are connected for the switches.2. Check the switches by on/off with ligts and fan.3. Ensure that the fuse is well (advanced) for the Switch board...

• #### How does Winrunner identify GUI object

• Jan 25th, 2010

Winrunner identifies GUI objects by using GUI spy.

#### mathan_vel

• Aug 19th, 2009

Winrunner identified the GUI object with the help GUI Map Editor. Which learns the Object throught the physical property (Class Name, object width, height, etc..)

• #### Test cases for mobile phone ?

• Feb 24th, 2016

Check is the right spelling not "Chek"

• Jan 24th, 2010

1. Check whether the dimensions of mobile are according to the requirements. 2. Check whether the functionalities are with respect to the requirements. 3. Check whether the colour is accroding to requ...

• #### What are data driven tests?

When you test your application, you may want to check how it performs the same operations with multiple sets of dat

• Feb 15th, 2010

Parameterization is done for multiple data. Data Driven test is used to parameterize the data.

#### pjchary07

• Sep 13th, 2007

Data driven test are used to test the application taking same operation with multiple set of data. As each iteration application is going to be tested with different sets of data which were assigned i...

• #### What are the two modes of recording?

There are 2 modes of recording in WinRunner i. Context Sensitive recording records the operations you perform on your application by identifying Graphical User Interface (GUI) objects.ii. Analog recording records keyboard input, mouse clicks, and the precise x- and y-coordinates traveled by the mouse pointer across the screen.

• Feb 15th, 2010

Context Sensitive Recording: It recognizes GUI objects. Analog Recording: It recognizes Mouse Movements.

#### pjchary07

• Sep 13th, 2007

i) Context Sensitive Mode: Records the application by learning Graphical User Interface objects with all its classes, logical names and physical properties.ii) Analog Mode: Records point to point mous...

• #### How you created you test scripts 1) by recording or 2) programming?

Programming. I have done complete programming only, absolutely no recording.

• Feb 15th, 2010

Test scripts can be created by both recording & programming. In programming : We manually write the scriptsIn Recording: Once you record an object the coressponding script will be shown.

#### satya.k

• Feb 9th, 2006

Hi,   We can create the script using both Recording or by programming using recording it will gives lot of problems its better to go for programming ...byesatya.k

• #### What is the purpose of GUI spy?

Using the GUI Spy, you can view the properties of any GUI object on your desktop. You use the Spy pointer to point to an object, and the GUI Spy displays the properties and their values in the GUI Spy dialog box. You can choose to view all the properties of an object, or only the selected set of properties that WinRunner learns.

• Feb 15th, 2010

GUI spy is used to identify the GUI objects.

• #### What is the different between GUI map and GUI map files?

The GUI map is actually the sum of one or more GUI map files. There are two modes for organizing GUI map files. i. Global GUI Map file: a single GUI Map file for the entire application ii. GUI Map File per Test: WinRunner automatically creates a GUI Map file for each test created. GUI Map file is a file which contains the windows and the objects learned by the WinRunner with its logical name...

• Feb 15th, 2010

GuI Map: 1)It consist of  GuI map editor which is used to recognize GUI objects.                2) It has physical description ,Logical desc...

#### anand00p

• Aug 2nd, 2006

The GUI map is actually the sum of one or more GUI map files. There are two modes for organizing GUI map files.i. Global GUI Map file: a single GUI Map file for the entire applicationii. GUI Map File ...

• #### What are the different modes of recording?

There are two type of recording in WinRunner. i. Context Sensitive recording records the operations you perform on your application by identifying Graphical User Interface (GUI) objects. ii. Analog recording records keyboard input, mouse clicks, and the precise x- and y-coordinates traveled by the mouse pointer across the screen.