How do you test a television?

Questions by puja123

Editorial / Best Answer

kurtz182  

  • Member Since Nov-2009 | Dec 12th, 2009


1) adherence to brand
2) packaging
3) operating manual
4) set-up
5) menu navigation
6) parental controls
7) visual performance adjustments
8) audio performance adjustments
9) visual modes (ex: picture in picture)
10) channel selection and sensitivity
11) ease of use
12) power supply
13) visual quality and adherence to standards
14) audio quality and adherence to standards
15) stress
16) environmental factors
17) interfaces
      - remote control
      - local antennae
      - cable box

Showing Answers 1 - 10 of 10 Answers

koina

  • Feb 27th, 2007
 

To Test  a Television-

1.Check the current is avilable or not.
2.Check all the wire connection(distance of electric board and television)
3.Check the cell/battry for remote.
4.On the television
5.Check the display of the television.
6.Use remote and check the range of remote.
7.Check the channel, volume, mode, setting, colour, etc...
8.Set the channel you want to watch

  Was this answer useful?  Yes

1. Check the Logo (Brand) in the Television.
2. Check the Usabilities (Screen(Size, Height, width),Switch off/on button, buttons in the Television and the functionalites)
3. Check the Remote Control functionalities.
4. Check the Color modes, Contrast, Brightness level adjustments.
5. Check the Audio Performance
6. Check the Scanner Setup for auto tunning.
7. Check the manual scanup function.
8. Check the Channel adjustments (Swap)
9. Check the Self Timer on/off
10. Check the Channel Lock option.
11. Check the Television performance by power off.

  Was this answer useful?  Yes

1) adherence to brand
2) packaging
3) operating manual
4) set-up
5) menu navigation
6) parental controls
7) visual performance adjustments
8) audio performance adjustments
9) visual modes (ex: picture in picture)
10) channel selection and sensitivity
11) ease of use
12) power supply
13) visual quality and adherence to standards
14) audio quality and adherence to standards
15) stress
16) environmental factors
17) interfaces
      - remote control
      - local antennae
      - cable box

  Was this answer useful?  Yes

Rakesh Kumar Singh

  • Jul 29th, 2011
 

1.Check the connection of wire and current flow.
2.Check that input voltage 230v /50 Hz and it should display the clear picture after providing the supply.
3.Power should be on within specified period of time.
3.Test the stress by applying high vlotage.
4.check aspect ratio(2/3) and interlace ratio of image.
5.Check that Rectifier is converting the AC into DC .
6.Check the transmission of signal via antenna.

  Was this answer useful?  Yes

Give your answer:

If you think the above answer is not correct, Please select a reason and add your answer below.

 

Related Answered Questions

 

Related Open Questions