Read a Switch

You are given only the IP address of the switch but not the port number. How will you read that switch?

Questions by ahmed12

Showing Answers 1 - 6 of 6 Answers

sonet

  • Aug 4th, 2010
 

A switch can have an Ip address for telnetting purpose.

So, if you telnet to the switch, and if you have no password on Telnet you can access the switch (provided that there is no privileged mode password set) and then 'Show Run' , you can read the running configuration.

  Was this answer useful?  Yes

sonet

  • Aug 4th, 2010
 

If the switch has an Ip address, you telnet to the switch and provided that there is no password set either at virtual terminals or to enter the privileged mode, you can enter privileged mode and write sh run and read the running config.

  Was this answer useful?  Yes

Give your answer:

If you think the above answer is not correct, Please select a reason and add your answer below.

 

Related Answered Questions

 

Related Open Questions