 Related Questions /tmp/log. Latest Answer : All the patch logs are stored in /var/sadm/patch//log ... boot -a Latest Answer : In PROM mode(ok prompt), give boot -a ... According the SA-238 course book, the Boot PROM chip is permanently soldered to the main logic board According the SA-238 course book, the Boot PROM chip is permanently soldered to the main logic board (motherboard)? True running diagnostics Latest Answer : u can set the nvram variable values while system is running.that is the main useand also u can set the device alias names as u wish ... boot -r , The other is to type touch /reconfigure, and then reboot Latest Answer : touch /reconfigure and then reboot the system. During reboot the new device is detected and also the reconfigure file is removed (or)boot -- -r (from UNIX shell as root user)(or)boot -r (from ok prompt)In Solaris 8 and higher, you can use the "devfsadm" ... printenv boot-device Latest Answer : eeprom boot-device the alias name of the boot-device where as prtconf -vp | grep boot ... The hardware-level user interface that you see before the operating system has been started is called: open boot PROM phase (post boot device loads boot block sector 0) Boot program phase (boot program loads ufsboot) Kernel Initialisation Phase (reads and initialises /etc/system start init Latest Answer : 1. Boot PROM Phase2. Boot Programs Phase 3. Kernel Initialization Phase4. init Phase5. svc.startd Phase ... uname -a or uname -r Latest Answer : uname- -r Prints the operating system release level. -s ... At the OBP how would see the device tree which will be used by the kernel during boot to configure devices? show-devs
Sponsored Links
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
