 Related Questions Difference between the communication and transmission.Transmission is a physical movement of information and concern issues like bit polarity, synchronisation, clock etc.Communication means the meaning full exchange of information between two communication media. In a baseband transmission, the entire bandwidth of the cable is consumed by a single signal. In broadband transmission, signals are sent on multiple frequencies, allowing multiple signals to be sent simultaneously. Latest Answer : Broadband refers to signaling method which includes a relatively wide range of frequencies butBaseband refers to only one type signaling method using a relatively medium's full bandwidth. ... Repeater:Also called a regenerator, it is an electronic device that operates only at physical layer. It receives the signal in the network before it becomes weak, regenerates the original bit pattern Latest Answer : Different type of networking / internetworking devicesRepeater:Also called a regenerator, it is an electronic device that operates only at physical layer. It receives the signal in the network before it becomes weak, regenerates the original bit pattern ... Difference between bit rate and baud rate.Bit rate is the number of bits transmitted during one second whereas baud rate refers to the number of signal units per second that are required to represent those bits.baud rate = bit rate / N where N is no-of-bits represented by each signal shift. It is a project started by IEEE to set standards that enable intercommunication between equipment from a variety of manufacturers. It is a way for specifying functions of the physical layer, the data link The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network Latest Answer : The adress resolution protocol (ARP) associates an IP address with the physical adress. On a typical physical network (eg: LAN) each device on a link is identified by a physical or station adress usually imprinted on the network interface card(NIC)Physical ... The Trivial File Transfer Protocol (TFTP) allows a local host to obtain files from a remote host but does not provide reliability or security. It uses the fundamental packet delivery services offered by Latest Answer : What is the difference between these layers and the switches ... Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router Latest Answer : Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router ... It is a system that performs a protocol translation between different electronic mail delivery protocols. Interior gateways connect LANs of one organization, whereas exterior gateways connect the organization to the outside world.
Sponsored Links
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
