-
Business Analyst, Developers and Testers
What do Business Analyst and Developers expect from the Testers?
kurtz182
- Dec 8th, 2009
Business Analysts expect testers to verify that all requirements have been satisfied by the application under test. They also expect testers to provide feedback if there are inaccurate, incomple...
srinivasulub1981
- Feb 12th, 2009
What do Business Analyst and Developers expect from the Testers?HiBusiness Analyst:I'm not sure, Business analyst is a person who is dedicated for gathering the requirements, so if tester has any ...
-
Manual Testing MS-Word Document
How do you do Manual Testing in MS-Word Document
srinivasulub1981
- Feb 12th, 2009
Hi I think this question asked for how a MS word doc can tested by a manual tester? if this It is not possible to tell the ans for this type of general questions.some of the cases:-> Verifyin...
krishna0518
- Sep 3rd, 2008
Here in our project we will be using in MS-Word documents for preparing the Test Cases/TOM,MOM.
-
Changing Requirements
How will you test support based sites where in the requirements of the clients keeps changing on daily basis?
kurtz182
- Dec 8th, 2009
I respectfully disagree with anyone who states this situation "doesn't effect test strategy." In fact, it would cause me to revise our test strategy. The only way these circu...
vk1978
- Feb 22nd, 2009
I worked with a product testing team where every member of the team are responsible for 1 or 2 products, I as assigned one product, in that product testing client requested changes in which few are in...
-
Testers and Quality Control
Does testing come under quality control or quality analysis?
kurtz182
- Dec 8th, 2009
The purpose of a test effort is to discover and report defects and is therefore a quality control activity. In contrast, an effort to prevent defects is a quality assurance activity.
sbkpati
- Nov 13th, 2009
As my friend said, Suppose examination is conducting in a class room Students are writing the exam, then invigilator role is just observing the students whether they are following the rules and regula...
-
What is the Difference between SRS and PDR
srinivasulub1981
- Nov 28th, 2009
Hi SRS: System Requirement Specifications: It contains the functional requirements of the application. PDR: Premilinary Desing Review: It also contains the system requirements, but with acceptable risk.CNU
rajeevn
- Jun 16th, 2008
SRS - System Requirement Specification It is the document which describes the high level product requirement.PDR - Product development Roadmap It describes the phases and schedules of product under development.
-
What is the Roll up in testing
prakhash32
- Aug 1st, 2010
There are 7 modules in the application say, ABCDEFGbut only 6 modules (A, B, C, D, E, F) modules are coded and tested.Then when they code the remaining module(G), they will test this new written modul...
saransh.kanaujia
- Mar 17th, 2008
As i mean from role up is to improve project then i think that testing hepls us to delever quality and long life products
-
What are non document techniques in testing
kurtz182
- Dec 8th, 2009
Test techniques that require no documentation are 'ad-hoc' and 'exploratory' testing.
srinivasulub1981
- Nov 28th, 2009
HIAny technique done while testing with out proper doc they will called as non document testing techniques..For ex: Adhock testing, Exploratory, etcCNU
-
What is Light Weight and Heavy Weight in Testing
kurtz182
- Dec 8th, 2009
Lightweight test projects are those that are small and of little complexity. For these reasons they are easily manageable.Heavyweight test projects are those that are large and of great complexity. For these reasons they are not easily manageable.
saransh.kanaujia
- Mar 22nd, 2008
hi as it is describe by vandana about heavy weight it's true, generaly these type of pjects have high risk project like aeroplane traffic cantrol software or any real time system software as conce...
-
What is a good requirement ?
How do you describe a good requirement, In terms of characteristics.As far as I know, A requirement without hidden dependencies and with general characteristics such as unique and so on.. can you add more
kurtz182
- Dec 8th, 2009
Characteristics of a good requirement are:1) Utility; has value to users2) Observable; process can be experienced by user(s)3) Mandatory; stakeholders would never agree to its absence4) Correct; ...
srinivasulub1981
- Nov 28th, 2009
HI -> It should be clear -> It should be able to develop -> It should be useful to the user -> It should be complete, should't create any confusions'etcCNU
-
In System Testing itself we are validating the data then why we have to go for Validation Testing
saransh.kanaujia
- Mar 20th, 2008
System testing is broad testing of a project when it is made fully. It contains verification and validation both testing
anamika123
- Feb 19th, 2008
I think You are rite Nagaarjuna....verifications will be done before actual testing starts like reviewing documents (design document , reviewing code, test documents) but it is not the answer of given...
-
What happens to the test plan if the application has a functionality not mentioned in the requirements?
kurtz182
- Dec 6th, 2009
When I first read the question, I didn't fully understand the issue, but now that I have reread it, it becomes quite clear that this scenario would require an immediate revision to the Test Plan.&...
srinivasulub1981
- Nov 28th, 2009
HI Then we need to plan for Adhoc /Exploratary tesing in the planCNU
-
A defect occured in version 1 but it raises in version 5 then What you have to do?
kurtz182
- Dec 6th, 2009
A defect that occurred in Version 1 of a product is rediscovered in Version 5. What would I do?1) I would first review the old defect report to gain knowledge on similarities and differences. Is there...
kurtz182
- Dec 6th, 2009
A defect that occurred in Version 1 of a product is rediscovered in Version 5. What would I do?1) I would first review the old defect report to gain knowledge on similarities and difference...
-
Which of the following statements about Regression statements are true?
1�Regression testing must consist of a fixed set of tests to create a base line2�Regression tests should be used to detect defects in new feature3�Regression testing can be run on every build4�Regression testing should be targeted areas of high risk and known code change5�Regression testing when automated, is highly effective in preventing defects. Options: I) 1&3II)1&5III)3&4IV)1,4 & 5V)2, 3 and 4...
-
how to test Maintenance project and what is the difference between the Maintenance project and project?
saransh.kanaujia
- Mar 20th, 2008
A project means a type of software to delever to client whereas maintenance comes after delevering the product. To keep that software uptodate according to the requirment. genearally retesting is involve here. It means testing of changes made in project according to the requirment
be.priyanka
- Mar 3rd, 2008
Maintenanace Project is something which has already moved to production and based on client inputs there are some changes or suggestions on the product.Project is a fresh project which with start from...
-
What is the basic difference between user acceptance & beta testing when both testing are done by end user.
srinivasulub1981
- Nov 30th, 2009
HIUAT: Its nothing but accepting the software del by customer, in other words transferring the owner ship to customer.Beta : Testing the app at customer place by end usersCNU
Balajirao19
- Jun 1st, 2009
Usually User Acceptance Testing is done before releasing the product at developers - place in the presence of Client and relevant people like tester, developer, architect,.. and where as Beta is done ...
-
What are the basic guidelines to test a financial application systems
What are the key points, approaches should be taken into our account while creating test plan, test cases to test a financial application system? I have worked on Health Care and Library domains but not have much ide bout financial. Can anybody help me please?
srinivasulub1981
- Nov 30th, 2009
I feel Domain knowledge plays a vital role while testing the application, in financial apps we can have these thing-> basic idea of accounts-> Who are the stake holders-> What they r expecting-> their general activities etcCNU
saransh.kanaujia
- Mar 17th, 2008
To test any project fist you should have knowledge of that field. If you are going to test a financial project use adhoc testing first because generally it contains so much calculation.
-
how do you analyze risk
mistrypt
- May 7th, 2008
Risk analysis is always done as a part of test plan activity. Where folowing points are taken in account like..1. which are thefuntionilities are more critical hitting directly customers stocks, data ...
jessa abraham
- Mar 27th, 2008
You can analyze risk on the basis of severity and priority. so one must know the requirement and what you are testing.
-
What is the purpose of software testing's - Bug removal, System's functionality working, quality or all?
Read Best Answer
Editorial / Best Answer
Answered by: Satya Prakash Itharaj.
- Oct 4th, 2005
The main purpose of Software testing, I think is not to remove the bug but to find the bug. Also ensuring the application works correctly as per the requirements and thereby increasing the quality of the product and increasing the confidence in the product.
manchoc
- Feb 18th, 2011
Its Quality. Testing is a Quality Control (QC) activity. Software testing is the process of finding the defects so as to improve the quality of software. It doesnt mean that the software is 100% defect free but the quality will be high after validating when compared before testing.
rohan.satpute
- Feb 6th, 2011
Purpose for Software Testing:1. To ensure whether the software Build is as per User Requirements/.2. To ensure reasonably Bug free Software, to uncover bugs withing software, if any.3. To improve qual...
-
How will you write test cases for a code currently under development?
Umashankar
- Dec 19th, 2011
HLD - High Level Design & LLD - Low Level Design
pavani prasad
- Mar 25th, 2010
We can write the test cases for code currently under development by using the use case document.
