-
What is the US Quality Award like Japanese Deming Award?
A) Malcolm Baldridge AwardExplanation: Malcolm Baldridge Award is the US Quality Award in line with Japanese Deming Award.
kurtz182
- Nov 24th, 2009
A) The Malcolm Baldrige National Quality AwardThe award that is presented to companies in Japan when they demonstrate utmost quality is called the Deming Prize. Its counterpart in the United States is called The Malcolm Baldrige National Quality Award.
-
Which Category carries maximum weightage in Malcolm Baldridge Award?
A) Customer focusExplanation: The Customer focus category carries the maximum weightage of 300 points out oF total of 1000 points
kurtz182
- Nov 24th, 2009
The Baldrige criteria consist of seven key indicators of success. Winners are selected on a 1,000-point scale for their achievements in all categories, so if one indicator is lacking, the chances of w...
-
Common Causes and Special Causes
What is the difference between common causes and special causes?
kurtz182
- Nov 25th, 2009
Common and special causes were introduced by Walter A. Shewhart and Edwards Deming to describe variation in a process through statistical methodologies. These concepts are used to discern d...
Deepak Sleeba George
- Mar 17th, 2008
Common-cause variation is characterised by:Phenomena constantly active within the system; Variation predictable Irregular variation within an historical experience base Lack of significance in individ...
-
What is meant by change request?
kurtz182
- Nov 25th, 2009
A change request serves to raise attention to a recommended modification to a program, process, or system. It indicates that a need exists but does not describe how this need will be fulfil...
Madhavan Karthikeyan
- Oct 12th, 2006
A change request mainly involves changes from client requirement, resource, QMS document.In a project, before the development could start the client requirements are freezed. When a cli...
-
Defect Injection Rate
What is Defect injection Rate and how it differ from Defect review effectiveness?
kurtz182
- Nov 27th, 2009
"Defect injection rate" refers to the number of defects that were discovered and reported during a particular iteration of product development (ex: software program). It is the total n...
-
Upper Management Responsibilities
What are the responsibilities of upper management?
kurtz182
- Nov 27th, 2009
In order for quality programs to be successfully implemented in a company, upper management must:1) Fully understand how quality programs can improve the bottom-line profitability of the com...
-
What does the Japanese Word Dantotsu mean?
A) Best of the BestExplanation: The concept of Benchmarking is based on the Japanese Word of Dantotsu meaning Best of the Best
kurtz182
- Nov 28th, 2009
Dantotsu has no equivalent English translation, but means 'better than the best' in Japanese. In efforts to produce utmost quality, it can mean going beyond expectations.
-
Benchmarking is the continuous process of measuring products, services and processes against the toughest competitors or those companies recognized as industry leaders
A) TrueB) False
kurtz182
- Nov 28th, 2009
A) absolutely true.Benchmarking is a valuable process that promotes continuous quality improvement.
-
Benchmarking considers your own organisation as the one with industry Best Practices that lead to superior performance
A) TrueB) FalseExplanation: Benchmarking is the search for industry Best Practices that lead to superior performance
kurtz182
- Nov 28th, 2009
B) False.Benchmarking seeks best practices in other organizations in order to produce quality improvements in your own organization. If your organization was the one exhibiting superior performance through best practices, there would be no need for benchmarking.
-
What is Benchmarking
A) Benchmarking is the method of Comparing your product to the best competitors.
kurtz182
- Nov 28th, 2009
Benchmarking is the process of comparing your process, product, or service with that which is considered to be the best. Benchmarking is often performed as part of a quality improvement pro...
-
In TQM, what is meant by the term 'Bring to the Table'?
A) Refers to what each individual in a meeting can contribute to a meetingExplanation: For example, a design or brainstorming meetings.
kurtz182
- Nov 28th, 2009
'Bring to the table' means to contribute something in a meeting. The more value added to the outcome of a meeting, the more has been 'brought to the table'.
-
FMEA Report
Create an FMEA report to make a pencil?
-
Reduce Severity
In FMEA, Is it possible to reduce severity? If yes, then how?
-
____ 's name is best known in relation to the concepts of Do It Right First Time & Zero Defects.
A) Philiph Crosby
-
The TWO fundamental classifications of Quality Costs are
A) Conformance Cost and Non-Conformance(or Control) costs
kurtz182
- Dec 15th, 2009
A) Conformance Cost and Non-Conformance(or Control) costsConformance costs are prevention costs and appraisal costs. Prevention costs occur with efforts to prevent defects. Appraisal costs...
-
The RPN is used to prioritize items that require additional quality planning or action
A) TrueB) False
kurtz182
- Dec 15th, 2009
A) TrueRisk Priority Numbers (RPN) help determine areas of greatest concern. The failure modes that have the highest RPN should be given the highest priority for corrective action.
-
Newell & Dale in 1991 said ‘Quality must be achieved in five basic areas: people, equipment, methods, materials and the environment to ensure customer’s need are met’
A) TrueB) False
winner24
- Dec 19th, 2005
True.For more info, plz visit the following link:http://www.hkbu.edu.hk/~samho/tqm/tqmex/intro.htm
-
In Benchmarking, Gap analysis is a method that helps identify the performance or operational differences between your process and that of your benchmarking partners, and to understand why the differences are there
A) TrueB) False
kurtz182
- Dec 15th, 2009
A) TrueGap analysis studies a particular business operation in order to understand the differences between your own practices and those of another company who have proven more succ...
amaralbert
- Sep 5th, 2009
Benchmarking is one of the improvement technique where organization compare it's process/product/service's performance with other (benchmarking partner) party to know the Gap between the performances....
-
Benchmarking makes you competitive
A) TrueB) False
kurtz182
- Dec 15th, 2009
B) FalseBenchmarking is the process of comparing an organization's business processes and performance metrics with those of another. Benchmarking alone will not make any organ...
-
_______________ developed Control Charts
A) DemingB) ShewhartC) ParetoD) Joseph Juran
kurtz182
- Dec 15th, 2009
B) Walter Shewhart developed control charts. Deming and Juran advocated its use while Pareto is the originator of the Pareto chart."Data has no meaning apart from its context."&nb...
Steve
- Feb 1st, 2006
B) Shewhart
Quality Management FAQs
Ans