Which two describe /dev/rmt0? (Choose two) A. The first instance of a tape drive. B. The physical device name for the default tape drive. C. The logical device name with hardware compression activated. D. The default tape device name as indicated in the /kernel/drv/st.conf file. E. The default tape device name that indicates the tape should not be rewound when the current operation completes.

Answer: A and D  

You have only a limited number of tapes available, and need to use them to hold as much data as possible. Which tape device allows you to save the most data on a single tape? A. /dev/rmt/oz B. /dev/rmt/01 C. /dev/rmt0m D. /dev/rmt/0h

Answer: D 

What is a valid /etc/vfstab entry for associating the /export directory with the device c2t3d0s0? A. /dev/dsk/c2t3d0s0 /dev/rdsk/c2t3d0s0 /export ufs 1 yes B. /dev/rdsk/c2t3d0s0 /dev/rdsk/c2t3d0s0 /export ufs 1 yes – C. /dev/dsk/c2t3d0s0 /dev/rdsk/c2t3d0s0 /export ufs 1 yes – D. /devices/dsk/c2t3d0s0 /devices/rdsk/c2t3d0s0 /export ufs 1 yes –

Answer: C 

With the system powered off, you physically connect a new SCSI disk intro the existing SCSI chain. You boot the system using the boot –r command. In which four locations can you find the new device names for the new SCSI disk? (Choose four) A. /devices B. /dev/dsk C. /dev/rdsk D. /kernel/drv E. /etc/path_to_inst F. /etc/name_to_major G. /platform/sun4u/kernel/drv

Answer: A, B, C and F 

You have four printers installed and configured on your print server. The printers are named according to their performance: veryfast, fast, medium, and slow. You want to define a print class, printclass, that incorporates all four printers and sends most of the work to the veryfast and fast printers. Which sequence of commands on the print server accomplishes this task? A. lpadmin –p veryfast,fast,medium,slow –c printclass B. lpsched –p veryfast,fast,medium,slow –c printclass

Answer: D 

You telnet into a Solaris machine and log in as user1. Your account is set up to use the C shell (csh) and your home directory is /home/user1. Which three files (assuming they exist) does the C shell read to initialize your environment? (Choose three) A. /etc/login B. /etc/.login C. /etc/profile D. /home/user1/.login E. /home/user1/.cshrc F. /home/user1/.profile

Answer: B, C and E  

A patch can be installed with no backout information saved to economize on disk usage. Which is the correct command to install the patch 105050-05 with “no backout” from /tmp? A. patch < /tmp/105050-05 B. patchadd /tmp/105050-05 C. pkgadd –d /tmp/105050-05 D. patchadd –d /tmp/105050-05

Answer: D  

The SUNWman package has been spooled into the /export/host1/packages directory. Your current directory is /etc. You want to obtain detailed information about this package before installing it into the Solaris Operating Environment on your system. Which command displays the information you want to see? A. pkginfo –dl . SUNWman B. pkginfo –dl /export/host1/packages SUNWman C. pkginfo –d /export/host1/packages –l SUNWman D. pkginfo –d SUNWman /export/hist1/packages

Answer: C  

You have shut down your system to run level 0, and you are at the ok prompt. You want to display a list of disk device paths and choose one to use it a customized device alias. Which OBP command allows you to select a device path and later insert it into the command line that creates the new device alias? A. devalias B. show-devs C. show-disks D. find-device

Answer: C  

Your telnet into a Solaris machine and log in as user1. Your account is set up to use the Korn shell (ksh) and your home directory is /home/user1. The following files are read by the Korn shell to initialize your environment on login: A. /home/user1/.kshrc B. /etc/profile C. /home/user1/.profile In which order are they executed? A. A, B, C B. A, C, B C. B, A, C D. B, C, A E. C, A, B F. C, B, A

Answer: D