Is it possible for a feedback surge to travel over a wireless connection? Would the answer be different in a vacuum?
Latest Answer : The series capacitor is conected to compensate for the line inductance and thus decrease the line reactance so that more power can be tranferred through the line (EV/X sin(delta)) and thus the system stability can be increased. ...
1. what is the different between CGS system and MKS system? 2. When we connect the capacitor Banks in Series with the circuit 3. What is the difference between Earthing & grounding 4. how much voltage
Latest Answer : When the current lead in the circuit use the capacitor in series. ...
What is the purpose of coupling capacitor?
Latest Answer : Because capacitors pass AC but block DC signals (when charged up to the applied dc voltage), they are often used to separate the AC and DC components of a signal. This method is known as AC coupling or "capacitive coupling". Here, a large value ...
What is the difference between a capacitor and a condensor?
Latest Answer : Low range of capacitors are called condensors. Like fan condensor, motor condensor. Where as high ranges are power capacitors. ...
Why do we use delta connected capacitor bank in a self excited induction generators and not star connected capacitor bank?
Latest Answer : dlta connection give avalue equal three times than staar connection ...
Why CTs are connected in star on T/F delta connected winding side & in delta on T/F star connected winding side for T/F differential protection?
Latest Answer : This to compensate the phase shift ...
Latest Answer : The capacitor is a device which store energy in the form of electrical energy. Condenser energy is stored when any machine is made to work in motoring mode. ...
The designed capacity of the transformer was 1600 watt. The utility company is in shortage of such wattage, so they used two 800 watt transformers in parrallel. The utility company uses only one circuit
Latest Answer : We should use one breaker because when one transformer was overload then If one breaker use = breaker is tripped and system is completely off.If two breaker use = one transformer tripped and load shifted to another transformer thats should damage ...
Why many people not connect the APFC/Capacitors in DG circuit?
Latest Answer : When normal supply is 'On' that time APFC will be on, At that time it will consume current, for correcting P.F, in case of D.G will not run continously so avoid over load on D.G APFC panel not connected. ...
