Taking Advantage of Standard Internet Protocols | |
Taking Advantage of Standard Internet Protocols As mentioned Oracle XML DB provides native support for standard internet protocols such as S WebDAV and Continuing with the preceding sample you might for example upload another employee XML document into the XML repository with one of the above prot
|
|
High-Speed Serial Interface (HSSI) | |
High Speed Serial Interface HSSI HSSI is High Speed Serial Interface was first developed by Cisco systems and the main purpose was to solve high speed requirement issues The main application of HSSI is on the Wide Area Networks and it helps to enhance the data flow speed on these networks It can wor
|
|
C++ Standard Input Output Stream | |
C Standard Input Output Stream In this C tutorial you will learn about standard input stream and standard output stream explained along with syntax and examples C programming language uses the concept of streams to perform input and output operations using the keyboard and to display information on
|
|
What is AES Standard | |
Advanced Encryption Standard (AES), also known as US FIPS PUB 197, is a block cipher which has been adopted as an encryption standard by the U.S. government, superseding the Data Encryption Standard (DES).
It is also known as Rijndael, which is a portmanteau of the surnames of the two Belgian crypto
|
|
What is AMPS Standard | |
Advanced Mobile Phone System (AMPS) is a first-generation (1G) analog mobile phone system standard developed by Bell Labs and introduced in America in 1983, with variants such as Total Access Communication System (TACS) available in Europe and Japanese Total Access Communication (JTAC) available in
|
|
What is 1000BASE-T Standard | |
1000BASE-T, or IEEE 802.3ab, is a Gigabit Ethernet wiring standard for Local Area Networks (LAN) that uses copper-based networking hardware as its medium. It is one of the most widely used standards of Ethernet over twisted pair.
The Institute of Electrical and Electronics Engineers Standards Associ
|
|
What is 100BASE-T Standard | |
100BASE-T is a subset of Fast Ethernet that refers collectively to a number of Ethernet wiring standards that carry signals at 100Mbps over twisted pair cables. Its IEEE-designated identifier is derived from its characteristics. "100" refers to its rate of transmission of Ethernet
|
|
What is 10BASE-T Standard | |
10BASE-T is an Ethernet standard for local area networks (LAN) that requires only one copper twisted pair cable of Category 3 (CAT-3) or higher, either unshielded twisted pair (UTP) or shielded twisted pair (STP), for a maximum network segment length of 100 meters for UTP, or 200 meters for STP.
I
|
|
What is 10BASE5 Standard | |
10BASE5 is an Ethernet standard that requires a specialized coaxial cable to transmit Ethernet frames at a rate of 10Mbps. It is also known as "Thick Ethernet" or "Thicknet" because of the thick coaxial cable it uses, which is 0.375 inches in diameter.
Its desig
|
|
What is 10BASE2 Standard | |
10BASE2, or IEEE 802.3, is an early Ethernet Standard that makes use of industry-standard RG-58 coaxial communications cables connected to BNC T-connectors.
10BASE2 gets its identifier, assigned by the Institute of Electrical and Electronics engineers (IEEE), from the following characteristics: &
|
|
|
