Give the pinout & functional block diagram with the parts and controls.
Latest Answer: The use of capacitor circuits instead of logical gates as in static RAMs demand the refreshing circuits.The charging and discharging of capacitors while storing bits could cause errors. ...
In a normalised floating point representation, mantissa is represented using 24 bits and exponent with 8 bits using signed representation. What is range ?
Latest Answer: interrupts ...
Latest Answer: When you stack up objects say plates, first plate which goes at the bottom of the stack can only be removed last.FILO ( First In Last Out) ...
Latest Answer: CMOS is preffered over NMOS as CMOS propogates both logic '1', and '0', without a voltage drop when using NMOS only, logic '1' (i.e Vdd) suffers a thresold drop and the output after passing through one NMOS gate would be Vdd-Vt(thresold voltage of ...
Latest Answer: It becomes a NOR gateL L HL H HH L HH H L
Now assumeH=1 and L=0 we get NANDH=0 and L=1 we get NOR
Similarly for AND gate we get OR gate
...
Latest Answer: Not many synthesis tools are available to synthesize a asynchronous design at RTL ...
A voice signal sample is stored as one byte. Frequency range is 16 Hz to 20 Hz. What is the memory size required to store 4 minutes voice signal?
Latest Answer: ALE( Address Latch Enable)this is a signal which goes HIGH everytime 8085 begins an operation. it indicates that the bits on AD0 to AD7 are address bits. this signal is mainly used to latch the low order address from the multiplexed bus. ...
View page [1] 2 3 4 Next >>
Go Top
